|
|
The technology of synthetic epoxy and poliurethan resins has largely determined the improvements in the quality of surface layers of floors in terms of their mechanical and esthetical characteristics. They have become easy to clean and chemical resistant, improving the hygienic standards of the areas where they are in use.
For floor laying, mortars based on epoxy resin are especially suitable, having the following characteristics:
- resistant to rolling traffic
- withstand impact
- resistant to chemically aggressive agents
- anti-skid surface
- inflammable
- odorless
- esthetically pleasing
KERATEK offers seamless epoxy floors from a well known Swedish company HESSELBERG, producer of epoxy and acrylic floors, acid-proof mortars for laying and jointing, as well as products used for anti-corrosive protection of building constructions.
Product range HESSELBERG:
EP - Mono
A self-smoothing epoxy surface available in wide range of colors.
- layer thickness: 2 – 3 mm
- characteristics: water-tight, resistant to most acids, alkalis, oils, grease and abrasion
- color: available in most colors
- application area: pharmaceutical industry, food industry, commercial buildings
EP - Multi
A solvent-free, self-smoothing epoxy base layer, with pigmented resin and quartz filler.
- layer thickness: 4 – 5 mm
- characteristics: extremely resistant to heavy-load traffic, resistant to most acids, alkalis and solvents
- color: 8 colors
- application area: both dry and wet areas, such as garages, storages, commercial -buildings, food industry, especially where high skid protection is needed, such as meat industry
EP - Decor
Epoxy surface, with pigmented quartz filler.
- layer thickness: 4 – 5 mm
- characteristics: highly decorative, resistant to heavy-load traffic, resistant to most acids, alkalis and solvents
- color: 8 colors
- application area: as a floor exposed to heavy traffic, and as a decorative floor
EW
Two-component epoxy surface, soluble in water.
- layer thickness: up to 0.5 mm
- characteristics: anti-dust, highly decorative, available with colored PVC flocks
- application area: industrial premises, commercial buildings, showrooms, warehouses etc.
Monostat
Two-component self-smoothing epoxy floor.
- layer thickness: 2 - 3 mm
- characteristics: anti-static, conductivity from 50 kW up to 25 MW, earthed every 100-200 m²; carbon fibers and electro conducting layer are used as conductors
- application area: for anti-static floors in electronic, computer or pharmaceutical industry, operating rooms, TV studios and similar
|
